Hi Pann,
You can click on C to arrange in Order.(In your case, need to click in the Tsklist dropdown)
Is this what you're looking for?
Jogeswara Rao K
↧
Re: Work order system condition Sequence in Task List
↧
Re: Compensation(salary) details are missing in Detailed team view
Hi,
Right now I have no access to Portal to share the screenshots. Meanwhile please give me the screenshot as suggested in above thread from the transaction SE80.
Goto: SE80
Navigation: WD-Component = FPM_OIF_COMPONENT > Application Config = HRMSS_TEAM_DETAIL > (Start Configurator) > Click on Continue in Display mode > Click on configuration name = HRMSS_TEAM_DETAIL_OIF_CC > Select the UIBB =HRMSS_TEAM_HIERARCHY > Click on Configure UIBB
Whether you have the same values as shown in below screenshot:
↧
↧
Re: HANA TRIAL Version - Not able to add system
Hello Avijit,
The issue is not solved yet. I have tried all your three options but still not able to add a system.
I have contacted Cloudshare support and they replied to contact devcenter@sap.com.
Best Regards,
Ariff
↧
Re: Problem in VA01...
Hi sumeet durgia,
Please suggest me what I have to do next....as you told me in include 'MV45AFZZ' I did the bellow code...but still I am not getting the desire result...
WHEN 'RV45A-KWMENG'.
if VBAP-PSTYV = 'ZEBO'
or VBAP-PSTYV = 'ZEBB'
or VBAP-PSTYV = 'ZEBN'
or VBAP-PSTYV = 'ZENN' .
SCREEN-INPUT = 0.
endif.
WHEN 'RV45A-MABNR'.
if VBAP-PSTYV = 'ZEBO'
or VBAP-PSTYV = 'ZEBB'
or VBAP-PSTYV = 'ZEBN'
or VBAP-PSTYV = 'ZENN' .
SCREEN-INPUT = 0.
endif.
↧
Re: Printer authenticaiton ID and Password
In other word, how to enable the FujiXerox ApeosPort Audition in SAP?
The printer is enable Audition.....
thank you.
↧
↧
Re: Reg:Function module for reading PDF File
Try EXECUTE method of CL_GUI_FRONTEND_SERVICES.
CALL METHOD cl_gui_frontend_services=>execute
EXPORTING
document = " Your filename with extension.
default_directory = " Path / Directory of your file.
Thanks, Abhinab
↧
Re: Messages stuck on Integration engine in to be delivered status
Hello Gurus,
My mistake , I am reframing my question .
I have 271 messages stuck for a synchronous scenario. All the messages stuck are responses to synchronous calls to an application and these responses are stuck in Integration engine with status to be delivered.
These messages cannot be cancelled , not can be resent .
How can they be handled ?
Regards
Joel
Message was edited by: joel trinidade
↧
regarding removing special characters
how to remove ' from a field ?
↧
Re: Gl profit centre Distribution in New GL .
Hi Preeti,
Thanks for the reply.
But I already read that document. But it is not going to help me.
As my distribution has to happen on the combination of Cost center and Profit Center.
For example,
G/L account is Salary
Cost Center is Sales, Marketing, Production and Financial.
All the above are assigned common profit center as Departments
Now from department cost center
Profit Centers --> Manufacturing and Trading.
Now for the correct distribution,
Salary + Sales = distribution percentage is 75% and 25%
Salary + Marketing = distribution percentage is 60% and 40%
Salary + Production = distribution percentage is 100% and 0%
Salary + Finance = distribution percentage is 50% and 50%
Can you help me in this?
↧
↧
Re: to choose SAP HR as career further
okie thank you sir.
↧
Re: Error At BP Creation
Hi Dave,
It was working fine before but when i tried to check FTO i stuck with the error. Now the Error got resolved.
Thanks for showing interest in the Query.
Regards
VK
↧
Re: LDAP initial load error
Hi,
When you run the initial load, check the create AS java System privilege pass is enabled.
If this pass is not enabled, the system will not create the attribute PRIV:SYSTEM:____
In the later pass, Write users, IDM tries to assign the privelege to the user which fails.
All the best !!
~ Krishna.
↧
Re: Profit center in F.05
HI Ramesan ,
According to Standard SAP system should copy the account assignment from the original document .
Can you please check you original document and please check whether document splitting is based on Inheritance of account assignment as well.
many thanks
↧
↧
Re: DMS server interface with EP without SAP ECC
Hi Chandu,
I have few queries on your question.
1) Do you want to view the DMS documents already stored in EP or just need a tool to collaborate documents with external business partners?
2) Is user license is a problem to you?
And kindly do not mix up content server with SAP DMS. SAP DMS can be used without content server also and content servers can also be used by other SAP applications without DMS.
Regards,
Ravi
↧
Re: ECC 6.0 EHP6 Installation in AIX
Hello George,
Please find the below logs when I ran the >./RUNINSTALLER from orag1d user:
.
.
. Performing pre-installation checks ...
.
. (OK) - Got value for <DB_SID> from environment.
. (OK) - Got location for Oracle base from environment.
. (OK) - Got location for Oracle stage from '-oracle_stage' option.
. (OK) - Oracle base location /oracle/G1D/112_64 exists.
. (WARNING) - Installation location /oracle/G1D/11203 already exists.
. (WARNING) - Installation location /oracle/G1D/11203 is not empty.
. (OK) - Run-time location /oracle/G1D/112_64 already exists.
. (OK) - Run-time location /oracle/G1D/112_64 is a directory.
. (OK) - Run-time location was created by SAPINST and can be renamed.
. (WARNING) - Inventory pointer file oraInst.loc is missing. You are starting your first installation on this host.
. (OK) - Group dba is defined.
. (OK) - Group oper is defined.
. (OK) - OUI version in stage is 11.2.0.3.0.
. (OK) - New response file /oracle/G1D/.11ginstall_11203.rsp created.
.
. Pre-installation checks completed.
.
.
. Environment settings:
.
. DB_SID = G1D
. DISPLAY = XXX.XXX.XX.X:0.0
. ORACLE_BASE = /oracle/G1D/112_64
.
. Installation Settings:
.
. Installation log file = /oracle/G1D/11ginstall_11203.log
. Oracle Release = 11.2.0.3.0
. Oracle stage location = /oracle/stage/112_64/database
.
. Oracle base location = /oracle/G1D/112_64 (exists)
. Oracle home install. location= /oracle/G1D/11203 (*) already exists (not empty)
. Oracle home run-time location= /oracle/G1D/112_64 (*) already exists (directory), created by SAPINST
. Inventory group = dba
. SYSDBA group = dba
. SYSOPER group = oper
.
. OUI Settings:
.
. OUI version = 11.2.0.3.0
. OUI temporary directory = /oracle/G1D/.11ginstall_11203.tmp
. OUI response file = /oracle/G1D/.11ginstall_11203.rsp
. OUI output log file = /oracle/G1D/.11ginstall_11203.oui
. OUI options = -waitForCompletion -ignoreSysPrereqs
. OUI inventory location = INVENTORY_LOCATION=/oracle/oraInventory
.
. Post Installation Settings:
.
. Create symbolic link = yes
. Type of symbolic link = relative
. Update OPatch/MOPatch = yes
. Clean up temp. files = yes
.
. OUI command line:
.
. LANG=C TMP=/oracle/G1D/.11ginstall_11203.tmp /oracle/stage/112_64/database/runInstaller -responseFile /oracle/G1D/.11ginstall_11203.rsp -waitForCompletion -ignoreSysPrereqs | tee /oracle/G1D/.11ginstall_11203.oui
.
. (INFO) - Starting Oracle Universal Installer in interactive mode - please wait ...
.
********************************************************************************
Your platform requires the root user to perform certain pre-installation
OS preparation. The root user should run the shell script 'rootpre.sh' before
you proceed with Oracle installation. rootpre.sh can be found at the top level
of the CD or the stage area.
Answer 'y' if root has run 'rootpre.sh' so you can proceed with Oracle
installation.
Answer 'n' to abort installation and then ask root to run 'rootpre.sh'.
********************************************************************************
Has 'rootpre.sh' been run by root? [y/n] (n)
y
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 190 MB. Actual 5118 MB Passed
Checking swap space: must be greater than 150 MB. Actual 5120 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /oracle/G1D/.11ginstall_11203.tmp/OraInstall2014-02-11_04-27-05AM. Please wait ...The java class is not found: oracle.install.ivw.db.driver.DBInstaller
.
. (INFO) - Oracle Universal Installer finished.
. (INFO) - Name of OUI session log file not found.
.
. Performing clean up tasks ...
. Clean up tasks completed.
.
. Post-installation tasks are not executed.
. Reason: installation location already existed before and was not empty
. Post-installation tasks have been skipped.
.
. Installation Results
. (SUCCESS) - Oracle Database software installation finished successfully.
. (INFO) - Installation Oracle home is /oracle/G1D/11203
. (WARNING) - Symbolic link for run-time Oracle home /oracle/G1D/112_64 was not created.
. (INFO) - You can create this link with the command 'ln -s 11203 /oracle/G1D/112_64'.
. (INFO) - Run this command -after the upgrade- after removing or renaming the original link or directory.
. (INFO) - You can find the installation summary log at /oracle/G1D/11ginstall_11203.log
. (EXIT) - Exiting with exit code 0.
I cannot see any OUI Screen after this also.
@Gaurav: .I have downloaded the script File from this SAP Note and Pasted it in the /oracle/stage/112_64/database/SAP directory.But still the same issue.
Kindly help me out to resolve the issue ASAP.
Thanks
Ajitabh
↧
Re: How to configure HTML Mashup...???
Seems like you are either stuck with mixed-mode problem or viewing in un-supported browser.
↧
Re: Payment details are not coming in Form 16 (PRD)
Hi
Did u check the class IF_HRXSS_SER_RFW which have the control for backend logics & also have u checked the Application Id to class XSS_HR_IN_F16 CL_HRXSS_IN_F16 in Prd system. and also confirm that you have the correct Logical form name in V_T5F99OMFG.
Note: Run the T-code HRESSIN_F16 & check whether u get the same or not.
Hope this Info 
will be helpful
Cheers 
Pradyp
↧
↧
Re: Stop PO confirmation using work center hierarchy
Hello
As far as I know, there is no customizing to block the confirmation for an hierarchy.
You can use BAdI WORKORDER_CONFIRM to make your own check for the work center.
BR
Caetano
↧
BPC authentification with BOE
Hello,
I need to create BPC10 (NW73) datastore in FIM, but in FIM_BPC admin guide wrote:
"In order to use the financial information management application you need an SAP BusinessObjects Central Management Server, or CMS"
But what's next? What must I to do into BOE or BPC(NW) side?
thanks in advance...
↧
Re: Unable to identify the request using SE03 for data sources
Hi Jalina,
go to SE09 -> select your request what ever you generated -> expand the request -> again expand the task -> there find the data source technical name.
select the data source goto menu -> version management -> there will show TR ( which TR collected these data source)
Thanks,
Phani.
↧